Portable Appliance Testers
 
     
 
6200

Portable Appliance Testers

The Model 6200 is a hand-held portable appliance tester, performing four functions to ensure the Safety of ClassI, ClassII and ClassIII 230V appliances. And also can measure the mains voltage.
Readings are displayed on a large liquid crystal display (LCD) below which are eight LEDs which unambiguously display a pass or fail indication for threshold values dictated by DIN VDE 0701/0702

This instrument is suitable for performing tests as required by the following standards.
DIN VDE 0701-1 (240):2000 Repairing, modification and testing of electrical equipment
DIN VDE 0702 : 1995 Periodic inspection for electrical equipment

RPE 20O+ / 20O-
Protective Conductor Test

RINS 200MO
Insulation Resistance		 IEL 20mA
Equivalent Leakage Current
Measuring
Range		 0~19.99O Measuring
Range		 0~19.99/
199.9MO
(2ranges auto)		 Measuring
Range		 0~19.99mA
Range 0~19.99/0~199.9MO
(2ranges auto)
Resolution of
Measurement		 10mO Resolution of
Measurement		 10kO/
100kOV		 Resolution of
Measurement		 0.01mA
Short Circuit
Current		 200~250mA
DC 		Rated
Voltage		 >500V DC
(+50%/-0%)		 Measuring
Voltage		 30V AC
Rated Current >1mA Internal
Resistance
(RA Meter)		 2kO
Open Circuit
Voltage		 ±5.0±0.4V DC Short Circuit
Current		 14mA(max.)
Accuracy ±(2%rdg
+3dgt) 		Accuracy ±(2%rdg
+3dgt) 		Accuracy ±(2%rdg
+3dgt)
IL 2mA
Contact Current		 VOLT
AC Voltmeter		    
Measuring
Range		 0~1.999mA Measuring
Range		 180~260V
(50/60Hz)		  
Resolution of
Measurement		 0.001mA Resolution of
Measurement		 1V
Internal
Resistance
(RA Meter)		 2kO Accuracy ±(2%rdg
+3dgt)
Accuracy ±(2%rdg
+3dgt)

 

General Supply Voltage 230V±10%
Frequency 50/60Hz±1%
Dimension 185 ( L)× 167 (W) × 89 (D) mm
Weight 1kg
Applicable
Standards		 IEC 61010-1 CAT.III 300V, Pollution Degree2
IEC 60950 Safety of Information Technology Equipment
IEC 61326-1 EMC requirements
Accessories 7125(Power Cord (EU))
7129(Test Leads with Alligator Clip)
7101(Flat Test Bar)
Probe Case
Shoulder Strap
Instruction Manual
 
6201A

Portable Appliance Testers

The KEW 6201A is a portable appliance tester, performing four functions to ensure the Safety of ClassI and ClassII appliances. And also can measure the mains voltage.
Readings are displayed on a large liquid crystal display (LCD) below which are four LEDs which unambiguously display a pass or fail indication for threshold values dictated by AS/NZS 3760.

This instrument is suitable for performing tests as required by the following standards.
AS/NZS 3760:2003 In-service safety inspection and testing of electrical equipment.

RPE 20ohms
Protective Conductor Resistance Test

 RINS 200Mohms
Insulation Resistance Test
Measuring
Range		 0~15.00 ohms Rating 250V/20MO 500V/20M
Measuring
Range		 0~19.99M
Resolution of
Measurement		 10m ohms Resolution of
Measurement		 10k
Open Circuit
Voltage		 < AC 12V Output Voltage 250V DC
(+20%/-10%)
@1M		 500V DC
(+20%/-10%)
@1M
Measuring
Current		 10A AC nominal value Short Circuit Current 2.5mA DC or less
Accuracy ±(3%rdg + 5dgt) Accuracy ±(2%rdg + 3dgt)
Leakage Current Test AC VOLT Mains Voltage Check
Measuring
Range		 AC 0.1~19.99mA Measuring
Range		 207~264V
Resolution of
Measurement		 0.01mA Resolution of
Measurement		 1V
Examination time Max 15 seconds
Accuracy ±(3%rdg + 5dgt) Accuracy ±(2%rdg + 3dgt)

 

General Supply Voltage 240V±10%
Frequency 50Hz±1%
Dimension 185 (L) × 167 (W) × 89 (D) mm
Weight 1.2kg (only the instrument body)
Applicable
Standards		 IEC 61010-1 CAT.III 300V Pollution Degree2
IEC 61326-1 EMC requirements
Accessories 7123(Power Cord (AU))
7129(Test Leads with Alligator Clip)
7101(Flat Test Bar)
7140(Adapter for Extension Cord)
Probe Case
Shoulder Strap
Instruction Manual
 
6202

``

Portable Appliance Testers

The Model 6201 is a hand-held portable appliance tester, performing four functions to ensure the Safety of ClassI, ClassII and ClassIII 240V appliances. And also can measure the mains voltage.
Readings are displayed on a large liquid crystal display (LCD) below which are three LEDs which unambiguously display a pass or fail indication for threshold values dic-tated by AS/NZS 3760

This instrument is suitable for performing tests as required by the following standards.
AS/NZS 3760:2001 In-service safety inspection and testing of electrical equipment

RPE 20O+ / 20O-
Protective Conductor Test

 RINS 200MO
Insulation Resistance		 IEL 20mA
Equivalent Leakage Current
Measuring
Range		 0~19.99O Measuring
Range		 0~19.99/
199.9MO
(2ranges auto)		 Measuring
Range		 0~19.99mA
Resolution of
Measurement		 10mO Resolution of
Measurement		 10kO/
100kO		 Resolution of
Measurement		 0.01mA
Short Circuit
Current		 200~250mA
DC		 Rated
Voltage		 >500V DC
(+50%/-0%)		 Measuring
Voltage		 30V AC
Open Circuit
Voltage		 ±5.0±0.4V DC Rated Current >1mA Internal
Resistance
(RA Meter)		 2kO
Short Circuit
Current		 14mA
(max.)
Accuracy ±(2%rdg
+3dgt) 		Accuracy ±(2%rdg
+3dgt) 		Accuracy ±(2%rdg
+3dgt)
IL 2mA
Contact Current		 VOLT
AC Voltmeter		 I LINE
Current Consumption
Measuring
Range		 0~1.999mA Measuring
Range		 180~260V
(50/60Hz)		 Measuring
Range		 0~16A AC
Resolution of
Measurement		 0.001mA Resolution of
Measurement		 1V Resolution of
Measurement		 0.01A
Internal
Resistance
(RA Meter)		 2kO Accuracy ±(2%rdg
+3dgt) 		Accuracy ±(2%rdg
+3dgt)
Accuracy ±(2%rdg
+3dgt)

 

General Supply Voltage 230V±10%
Frequency 50/60Hz±1%
Dimension 185 ( L)× 167 (W) × 89 (D) mm
Weight 1kg
Applicable
Standards		 IEC 61010-1 CAT.III 300V, Pollution Degree2
IEC 60950 Safety of Information Technology Equipment
IEC 61326-1 EMC requirements
Accessories 7125(Power Cord (EU))
7129(Test Leads with Alligator Clip)
7101(Flat Test Bar)
Probe Case
Shoulder Strap
Instruction Manual
 
 
  Back to Kyoritsu Main Page