Leaded 967 Planar high voltage resistors (Thick Film)

- Tolerance as low as ± 0.1%
- High voltage capability
- Non inductive
- Low TCR
- Both axial and radial leaded
- RoHS Compliant

Technical Specification

- Wattage to 17W
- Resistance Tolerance: ±0.1% to ±10%
- Temperature Coefficient ±15PPM/°C to ±200PPM/°C
- Load Life: R/R 0.5% max., 1000 hours at rated power
- Dielectric Strength: > 1000V
- (25°C, 75% relative humidity)
- Operating Temperature: -55°C to +225°C

Technical Specification

- Resistance Range Min 10R, Max 20M
- Rated Power 0.7 – 22W continuous
- Tolerance 5%
- Pulse withstand 50J to 4.4KJ
- Temperature Coefficient 100ppm
- Permitted Element Voltage to 12KV continuous, to 25KV pulse
- Operating Temperature Range | -55°C to +125°C
- Climatic Category | 55/125/56

Technical Specification

- Power Ratings to 17W
- Resistance tolerances offered from 1.0% to 10%
- TCR: 20PPM/ºC to 150PPM/ºC
- Voltage Ratings from 2KV to 48KV
- Resistance Range up to 10,000 GigOhms

Technical Specification for HTE

Technical Specification for HTS

- Non Inductive, Thick Film
- High Voltage to 150 kVdc
- 200R - 10T
- RoHS Compliant

Technical Specification for 969

Technical Specification for UT

- S Series resistance range 0.005 to 50K Ohms
- SL Series resistance range 0.005 to 0.1 Ohms
- Up to 4W
- Tolerance to ±0.01%
- Low TCR (20PPM)
- Superior Surge Handling Capability
- Reel Packaging in Embossed Carrier Tape
- Available in Non-Inductive (Ayrton-Perry) Winding (Type SN)

Technical Specification

- Resistance Range: 0.1 to 100K Ohms
- To 10W
- Tolerance From: ±0.05%
- Available On Tape: Up To 5W
- High Temperature Silicone Coated
- All Welded Construction
- Available In Non-Inductive Style (Type N)
- Special Matching Available (TCR And Tolerance)

Technical Specification

- Resistance range R005 to 100K Ohms
- To 600W
- Tolerance from 0.5%
- High power to volume ratio
- All welded construction
- Available in Non-Inductive Style (Type N)
- High pulse withstand capability
- Connection variation available

Technical Specification for HS

Technical Specification for HSW

- High power density
- Non inductive
- Planar package
- Heat dissipated well above board level

Technical Specification

- Resistance Range 0.005 to 0.05
- Power to 5W
- Tolerance to 1%
- TCR to 20PPM
- Low Inductance <10NH
- Welded Flameproof Construction

Technical Specification

- Resistance range 0.02 to 125K Ohms
- To 1000W
- Tolerance from 1.0%
- Very high pulse withstand capability
- All welded construction
- Connection variation available

Technical Specification

- Resistance range 0.02 to 125K Ohms
- To 1000W
- Tolerance from 1.0%
- Very high pulse withstand capability
- All welded construction
- Connection variation available

Technical Specification

- TO220 housing
- Rated power 50 watts
- Resistances from 0.02 to 100k ohms
- Operating temperature -40°C to +155°C
- RoHS Compliant

Technical Specification

- Isotop/SOT227 Semiconductor Style
- 100 Watts dissipation in a small footprint
- Very low inductance
- Direct heatsink mounting
- RoHS Compliant

Technical Specification

- Low inductance (<50NH)
- Rated power 250W
- Resistances from R02 to 100K Ohms
- Resistance tolerance to ±1%
- Operating temperature -40°C to +155°C
- TCR to 50PPM

Technical Specification

- Tape and Reel packed.
- Low profile options
- TCR 5ppm/°C to 100ppm/°C
- Close tolerance to 0.05%
- Resistance range 3R3 to 3M3

Technical Specification

- Resistance Range Min 10R, Max 1M
- Rated Power @ 70°C 0.25W
- Tolerance | B (0.1%)
- Temperature Coefficient | 15PPM/°C
- Selection Series | E48, E96
- Permitted Element Voltage | 350V Max
- Operating Temperature Range | -55°C to +125°C
- Climatic Category | 55/125/56

Technical Specification

- Low inductance
- Low capacitance
- High pulse capability compared with film type or carbon composition resistors.
- Pulse voltage to 14kV
- Resistance range 2.2 - 22M

Technical Specification